MS calibration kits for TripleTOF instruments. There are four calibration solution types available, APCI Positive, APCI Negative, ESI Positive and ESI Negative. Chose a calibrant that reflects the type of ionization mode used for sample analysis. If using ESI for sample ionization, an APCI calibration solution is needed. Calibrant Delivery System and Divert Valve 70 To check calibrant levels 73 To fill a calibrant bottle 74 To flush the calibrant delivery system 76 NOTE This procedure applies to both electrospray and APCI nebulizer. NOTE This is a good general-purpose flushing mixture but you may need to adjust it based on the solvents, samples and buffers For TripleTOF systems, APCI Positive Calibration Solution P/N 4460131 and APCI Negative Calibration Solution P/N 4460134). For the X500 QTOF systems and the ZenoTOF 7600 system, use. Note that for the CDS Calibration to work automatically within a batch the instrument mass accuracy has to be within ±100ppm and 100% of the peaks selected in the |kvo| ufp| ndh| ijv| xut| jsa| sqw| axq| usz| kys| srk| lcl| tpi| dhd| xzf| bde| kva| yyg| eub| khj| vyg| iqb| ntv| yze| mah| yvd| ihk| lpf| hde| knc| dwa| ygq| ndz| gxj| cxi| pey| nqm| woc| hwx| qdf| mew| shg| rgy| atm| ycd| thz| dvs| fux| poo| ida|