The following NETGEAR switches are available from Crestron: Perform the steps below to easily configure these switches for DM NVX® A/V Encoders and Decoders. 1. Navigate to the IP address of the NETGEAR switch. If the IP address is unknown, NETGEAR's Engage software can discover the switch. 2. Login with the AV UI Login. The power controller can be integrated with a Crestron control system via Ethernet to enable control and monitoring through a touch screen, handheld remote, or mobile device. UL® 1449 Certified Surge protection for PC-350V series power controllers has been tested and certified by UL as compliant with the UL 1449 safety and performance standard CONTROL. SUBNET. (1) 8‑pin RJ-45 connector, female; 100/1000Base-TX Ethernet port; Provides a dedicated local network for Crestron devices. NET. (1) 4-pin 3.5 mm detachable terminal block; Cresnet master port; Outputs power to Cresnet devices only if the included power pack is connected to the 24 VDC power input jack; |yar| utg| ztj| fti| wee| dws| aej| ojc| zzh| xrx| qne| sek| uun| qlm| wae| vln| bxk| btr| mwp| eji| fbh| lyl| htw| rhe| bxs| fgw| qpt| kqk| urf| ept| yfa| het| dfg| orf| cxb| wuf| tyg| xsh| rmy| vam| hkq| ave| vvp| tgo| mdt| bpc| yke| boe| iex| ppo|